Edge Milling Machine Manufacturer From China

FENGWEI edge milling machine mainly includes a machine base, two side plates, a beam, and a tool rest. There is a worktable on the base, and several hydraulic pressure plate devices are connected to the lower part of the beam. The hydraulic pressure plate device is located above the work table. It also has a knife The carriage travel trolley, and the tool carriage are installed on the carriage travel carriage, and the front of the machine base is provided with a guide rail that is parallel to the work table and has the same length.

The edge milling machine adopts the form of sliding guide rails commonly used on heavy machine tools, with a large contact area, good rigidity, and strong shock resistance. Drawing on the experience of foreign heavy-duty machine tools, to reduce the frictional resistance of the guide rail, a large carriage unloading device is added. A load-bearing rolling cylinder is installed between the guide rail and the large carriage, and the rolling cylinder bears most of the gravity of the large carriage. 

In this way, the frictional resistance of the guide rail is changed from simple sliding friction to sliding and rolling, the friction coefficient is greatly reduced, and the friction force is also greatly reduced. Correspondingly, the service life of the guide rail is increased. To improve the wear resistance of the guide rail pair and improve the friction characteristics, the corresponding friction pair is covered with plastic. Commonly known as plastic guide rails. The plastic chemical composition of the plastic-coated sliding guide is stable and the friction coefficient is small.

Advantages of edge milling machines

1. The unique driving function is adopted, which greatly reduces the difficulty of operation.

2. The use of a special stabilization device can further improve the original machining accuracy, which is very beneficial to the expansion of its application range.

3. The processing objects that this product can meet have also changed greatly, and almost all kinds of metal materials can be cut.

4. Through the continuous enrichment of cutting tools, it can meet the application needs of different fields.

Routine maintenance of edge milling machine

Always turn off the power before all maintenance, maintenance, and cleaning of the edge milling machine. Before using the automatic edge milling machine, clean the iron filings and stains on the blade and keep the ventilation holes unobstructed; after each shift, when cleaning and changing the tool, use a rag or brush to clean the blade shaft, the protruding part of the lower pressure ring, and the upper-pressure ring. , Milling blade and tool compression nut (can not be cleaned with compressed air around the ventilation hole to prevent debris such as iron filings from entering the gearbox).

1. Observe the oil level of the gearbox body before each use. When the oil level is lower than the center line of the oil level, add worm gear oil through the oil filling port until it does not overflow. And under normal conditions, the worm gear oil in the gearbox is updated every three months, and the oil cavity is cleaned during the update.

2. Inject 30# lubricating oil into the lubricating oil port every 8 hours to ensure that the transmission parts are well lubricated.

3. Clean the lead pin groove on the chute, the guide rail surface of the machine base, and the screw rod, and apply 30# lubricating oil every week. 4. Clean the chute every three months, select a suitable pipe fitting, and clamp it with a clamping seat.

5. Remove and remove the front panel and gearbox body, clean the inner surface of the chute and all surfaces of the box body, then apply 30# lubricating oil evenly, and reassemble.

6. When the steel plate edge milling machine is not used for a long time, the exposed parts that are not painted should be coated with anti-rust oil, and the exposed parts should be covered and placed in a dry place.